Difference between revisions of "T2-301"
Latest revision as of 12:13, 26 April 2010
The T2-301 adds the following commands for radio control:
SETFREQ ttt.ttt rrr.rrr - Sets the transmit and receive frequencies in MHz, for example SETFREQ 144.390 144.390 to set transmit and receive both to 144.39 MHz. (Note that the receive frequency echoed by the command may not be what was entered; this is a minor glitch that will be fixed in future versions.)
SETPOWER pp - Sets the transmit power, from 0 to 99. The scale is non-linear and varies with the supply voltage, and there is some variation from unit to unit, but the following values are guidelines:
|-||0||< 1 mW|
|12.5 V||~42||5 W|
|15 V||99||> 9 W|
Ports A and B are RS-232. The command console and configuration program can be used only with Port A.
The pinouts for the 9-pin radio connector differ from Radio Wiring for all other Argent data products.
|1||Port B in|
|2||Port A out|
|5||Power in (9-15VDC)|
|8||Port A in|
|9||Port B out|