This Wiki contains support information and related documentation for Argent products. For ordering information, see our online store.
APRS Tracker/TNC Products
The original OpenTracker was based on the MC908KX8 microcontroller.
The OpenTracker+ replaced the original OpenTracker and was based on the MC908JL16 microcontroller. It added limited receive capability.
The Tracker2 series expanded on the OpenTracker+ series and added a command console, dual serial ports, remote command capability, digipeating, and many more functions. The series was based on the MC908AP64 microcontroller.
The Tracker3 improves on the Tracker2 with USB support and a more capable 32-bit processor. The OpenTracker USB shares most of the Tracker3's capabilities and source code, but runs on a smaller 8-bit microcontroller.
Safe Mode - Recovery process for the T3 series
ADS-WS1 Weather Station
ADS-SR1 Simplex Repeater
Radio Shield for Arduino
Radio Shield 2 for Arduino
GTRANS GPS Translator Cable
- GTRANS Kenwood TH-D72A to Garmin Nuvi 350 Setup
- GTRANS Yaesu FTM-350R to Garmin Nuvi 350 Setup
SSTVCAM Slow-scan television module
Other Support Topics
Scripting for the Tracker2
- Script Examples for the Tracker2