Difference between revisions of "Windows INF File Installation"
From ArgentWiki
| Line 1: | Line 1: | ||
| + | (INF file is available for download [http://www.argentdata.com/files/ArgentUSB.zip here]) | ||
| + | |||
How to install the INF driver for OpenTracker USB and Tracker3 devices. This procedure should work on both 32-bit and 64-bit operating systems, and works with Windows 7. | How to install the INF driver for OpenTracker USB and Tracker3 devices. This procedure should work on both 32-bit and 64-bit operating systems, and works with Windows 7. | ||
Latest revision as of 13:49, 30 November 2016
(INF file is available for download here)
How to install the INF driver for OpenTracker USB and Tracker3 devices. This procedure should work on both 32-bit and 64-bit operating systems, and works with Windows 7.
Windows 8 requires signed drivers. There aren't presently signed drivers available for the OTUSB and T3, but you can temporarily disable the restriction using the instructions here.
- Plug in the OpenTracker USB and open Device Manager.
- Under "Other devices" there will be an "Unknown device." Right-click the "Unknown device" and select Properties to ensure this is the correct device (VID 134A, PID 9000). Close the Properties dialog.
- Right-click the item and select "Update Driver Software"
- Select "Browse my computer for driver software and navigate to the folder containing the OpenTrackerUSB_Windows7.inf driver.
- Click the Next button. The driver may take a minute or two to install.
- Refresh the Device Manager to show the newly installed Tracker. The COM port can be changed by right-clicking the Tracker, clicking Properties, selecting the Port Settings tab, clicking the Advanced button, and choosing the COM port from the drop-down list. You can reassign any COM port to your Tracker.
