Difference between revisions of "T3-Mini"
From ArgentWiki
(→T3-Mini / OTUSB-Mini) |
|||
| Line 80: | Line 80: | ||
| Unregulated supply voltage, 6v to 28v | | Unregulated supply voltage, 6v to 28v | ||
|} | |} | ||
| + | |||
| + | GP6 also functions as the power relay output. | ||
Revision as of 10:14, 1 April 2013
T3-Mini / OTUSB-Mini
The Mini board is an embeddable tracker module measuring 1.72" by 1.12" (43mm by 28mm) and weighing 5.5 grams. The same board can be equipped with a Tracker3 MCU or an OpenTracker USB MCU, configurations referred to as the T3-Mini and OTUSB-Mini respectively.
The Mini features 13 general-purpose I/O pins (GP1 through GP12 and AUX) and four analog inputs. Connections are made through 34 contacts in two rows of 17, with a pitch of 0.1" and row spacing of 1" center to center. A mini USB type B connector provides a simple connection for a PC.
All software functions of the full-size versions are retained.
Files
Specifications
Pin Assignments
| Pin | Function |
|---|---|
| A1-A4 | Analog inputs 1-4 (max 4xVdd) |
| 1W | Dallas 1-Wire data bus |
| SQL | Squelch input |
| AUX | Auxiliary I/O pin |
| GND / GND2 | Ground |
| GP1-GP12 | General purpose digital input/output pins |
| RST | Reset (active low) |
| B-RX | Serial port B input |
| B-TX | Serial port B output |
| A-RX | Serial port A input |
| A-TX | Serial port A output |
| CFG | Configuration select |
| GRN | Green LED output for external LED |
| RED | Red LED output for external LED |
| AOUT | Audio output (to radio) |
| AIN | Audio input (from radio) |
| PTT | Push-to-talk (open collector) |
| 5V | Regulator output or Vdd input, 5v max, 2.8v min |
| VIN | Unregulated supply voltage, 6v to 28v |
GP6 also functions as the power relay output.
