View source for Windows INF File Installation

How to install the INF driver for OpenTracker USB and Tracker3 devices. This procedure should work on both 32-bit and 64-bit operating systems, and works with Windows 7.

Windows 8 requires signed drivers.  There aren't presently signed drivers available for the OTUSB and T3, but you can temporarily disable the restriction using the instructions [http://www.makeuseof.com/tag/how-can-i-install-hardware-with-unsigned-drivers-in-windows-8/ here].

# Plug in the OpenTracker USB and open Device Manager.
# Under "Other devices" there will be an "Unknown device." Right-click the "Unknown device" and select Properties to ensure this is the correct device (VID 134A, PID 9000). Close the Properties dialog.<br />[[File:Inf_devicemanager.png]]<br />[[File:Inf_vidpid.png]]
# Right-click the item and select "Update Driver Software"
# Select "Browse my computer for driver software and navigate to the folder containing the [http://www.argentdata.com/files/OpenTrackerUSB_Windows7.inf OpenTrackerUSB_Windows7.inf] driver.<br />[[File:inf_updatedriver.png]]<br />[[File:Inf_driverfolder.png]]<br />[[File:inf_driversearch.png]]
# Click the Next button. The driver may take a minute or two to install.
# Refresh the Device Manager to show the newly installed Tracker. The COM port can be changed by right-clicking the Tracker, clicking Properties, selecting the Port Settings tab, clicking the Advanced button, and choosing the COM port from the drop-down list. You can reassign any COM port to your Tracker.<br />[[File:Inf trackerproperties.png]]<br />[[File:Inf_portsettings.png]]<br />[[File:Inf_advanced.png]]