http://wiki.argentdata.com/api.php?action=feedcontributions&user=La5ppawiki&feedformat=atomArgentWiki - User contributions [en]2024-03-28T15:22:47ZUser contributionsMediaWiki 1.24.4http://wiki.argentdata.com/index.php?title=Xastir_Setup&diff=336Xastir Setup2010-02-24T08:52:19Z<p>La5ppawiki: </p>
<hr />
<div>Xastir Setup<br />
(This information is based on my Linux Ubuntu 9.04 installation with Xastir 1.9.4 installed)<br />
<br />
First of all you need to download and install Xastir.<br />
<br />
Since the otwincfg.exe is a Windows application you have to download Wine, this will allow you to run Windows applications within Ubuntu.<br />
<br />
To get Wine installed type the following at terminal prompt: sudo apt-get install wine<br />
<br />
Then you can download the otwincfg.exe program and to make it easy, save it on the desktop.<br />
<br />
To start otwincfg.exe you have to right-click on the program and select Open with "Wine......."<br />
<br />
So, back to Xastir, assuming you have installed the application press Interface and then Interface Control, then click the Add button, select Serial KISS TNC from the list and then the Add button.<br />
<br />
Depending on what you want there are some options there to turn on and off but you have to specify the comport for the TNC.<br />
<br />
Typically Com1 is /dev/ttyS0<br />
<br />
Port Settings 9600bps<br />
<br />
Hope this info is usefull, I have been using Xastir with my T2 for over a year now as a Fill-In digi with IGate TX/RX (LA5PPA-2)</div>La5ppawikihttp://wiki.argentdata.com/index.php?title=Tracker2&diff=334Tracker22010-02-24T08:41:45Z<p>La5ppawiki: </p>
<hr />
<div>[http://www.argentdata.com/support/tracker2.html Official support page]<br />
<br />
[https://www.argentdata.com/products/tracker2.html Product page]<br />
<br />
[[Scripting]]<br />
<br />
[[Authentication]]<br />
<br />
[[Digipeater Setup]]<br />
<br />
[[UI-View Setup]]<br />
<br />
[[AGWPE Setup]]<br />
<br />
[[OTWINCFG|Configuration program]]<br />
<br />
[[LCD Interfacing]]<br />
<br />
[[Xastir Setup]]<br />
<br />
== Fleet Management Interface ==<br />
<br />
The Tracker2 supports the [[Garmin FMI]] protocol for position data, text messaging, and tracker control. See Garmin's list of [http://www8.garmin.com/solutions/pnd/supportedproducts.jsp FMI-capable models].<br />
<br />
== Hardware Variations ==<br />
<br />
The Tracker2 has been produced in a number of variations.<br />
<br />
[[OT2m]] Stand-alone unit in a metal enclosure<br />
<br />
[[T2-135]] Plug-in board for the Alinco DR-135<br />
<br />
[[T2-301]] Plug-in board integrated with the FC-301/D transceiver<br />
<br />
=== Early Versions ===<br />
<br />
'''Proto E''' - Identical to OT2m v1.0 with the exception of some PCB markings, thermal vias, and C2 being replaced by 0.001uF cap. <br />
<br />
'''Proto D''' - Flawed prototype, never released<br />
<br />
'''Proto C''' - The most widely distributed version during beta testing. Proto C and earlier used all through-hole parts and had a passive input filter.<br />
<br />
'''Proto B''' - Early prototype with limited production<br />
<br />
'''Proto A''' - Early prototype with limited production</div>La5ppawiki